Alkaline heater are made of Chrome Nickel sheathed heating element brazed to C.I. junction box for mounting on side of the vessel, easy to remove & clean.
Used for heating Alkaline cleaning solution detergents and other alkaline solutions normally corrosive to mild steel (upto 90oC).
| Type | Watts at 230 Volts | Vertical Length | Ineffective Length |
|---|---|---|---|
| AIH/10/460 | 1000 | 460 mm | 150 mm |
| AIH/20/610 | 2000 | 610 mm | 150 mm |
| AIH/30/685 | 3000 | 685 mm | 305 mm |
| AIH/40/685 | 4000 | 685 mm | 305 mm |
These heaters are made of stainless steel pipe welded to Stainless Steel threaded flange which is fitted with a replaceable refractory insulated Bobbin heating element inside.
SS - 304 - Alkaline Solution.
SS - 316 - Phosphating Solution.
These heaters are made of MS/SS Lead bonded pipe welded to MS/SS Flange having a replaceable refractory insulated Bobbin heating element inside.
Heating of Sulfuric Acid Solution with less than 10% concentration.
These are made of imported fused silica tubing with re-mountable heating element inside & provided with heat resistent rubber cap and a connecting cable.
Highest temperatures in all acids, ferric chloride etching baths, anodising, bright dip baths, except hydrofluoric and phosphoric.
| Type | Watts at 230 Volts | Heating Length | Total | |
| Ineffective | Effective | |||
| SIL/10/450 | 1000 | 150 mm | 300 mm | 450 mm |
| SIL/20/600 | 2000 | 150 mm | 450 mm | 600 mm |
| SIL/30/750 | 3000 | 150 mm | 600 mm | 750 mm |
| SIL/40/900 | 4000 | 150 mm | 750 mm | 900 mm |
These heaters are made of Titanium sheathing brazed to C.I. junction box for mounting on side of the vessel.
Heating of Nitric and Chromic acid Solution.
These are SS Tubular Heaters having a Lead bonding on Tubes, welded to C.I. junction box for mounting on side of the vessel.
Heating of Sulfuric Acid Solution with less than 10% concentration.
