These heaters are made of one Copper sheathed Tubular heating element filled with high grade insulation powder & kanthal wire coil at the centre which is brazed to a Brass flange. Heaters are nickel chrome plated and are provided with earthing Terminals. A metallic cap is provided for protection of Terminals.
Light duty (intermittent) boilers, Washing machines, Geysers, Coffee urns, Sterilizers and for other commercial purposes.
| Type | Watts | Volts | Depth Immer | Flange |
| Commercial Water Immersion Heaters | ||||
| CH/10/220 | 1000 | 230 | 220 mm | 1 ¼" BSPT |
| CH/15/220 | 1500 | 230 | 220 mm | 1 ¼" BSPT |
| CH/20/325 | 2000 | 230 | 325 mm | 1 ¼" BSPT |
| CH/30/425 | 3000 | 230 | 425 mm | 1 ¼" BSPT |
These heaters are made of Two or more Copper sheathed Tubular heating Elements brazed to brass flange. Heaters are nickelchrome plated and are provided with earthing terminals. A metallic cap is provided for protection of terminals.
Heavy duty industrial hot water baths, water jacketed apparatus, side arm circulating process tanks etc.
| Type | Watts | Volts | Depth Immer | Flange |
| Industrial Water Immersion Heaters | ||||
| IH/20/220 | 2000 | 230 | 220 mm | 1 1/4" BSPT |
| IHS/20/220 | 2000 | 230 | 220 mm | 1 1/2" BSPT |
| IH/30/280 | 3000 | 230 | 280 mm | 1 1/4" BSPT |
| IH/30/220 | 3000 | 230/400Y | 220 mm | 1 1/4" BSPT |
| IHS/30/220 | 3000 | 230/400Y | 220 mm | 1 1/2" BSPT |
| IHT/40/260 | 4000 | 230/400Y | 260 mm | 2" BSPT |
| IHT/50/320 | 5000 | 230/400Y | 320 mm | 2" BSPT |
| IHT/60/380 | 6000 | 230/400Y | 380 mm | 2" BSPT |
| IHT/90/550 | 9000 | 230/400Y | 550 mm | 2" BSPT |
| IHX/120/575 | 12000 | 230/400Y | 575 mm | 2 1/2" BSPT |
These heaters are used in Solar water heater tanks as supplementary backup electric heater, turns ON in the event the water in the Solar Water Heater falls below desirable temperatures during prolonged rainy or overcast periods. these heaters are provided have a Stem Thermostat fitted inside so as to regulate the water temperature at the desired standard bathing water Temperature.
Used as a Electric Backup Heating Element for Solar water heating systems.
Flange immersion heaters are the heaters in which a Round or Square SS/MS Flange is provided on which the Tubular heaters are welded, The Flange has fixing holes & are typically inserted horizontally into a tank or vessel for direct heating of liquids, allowing the fluid to quickly reach the desired temperature and ensure optimized high performance results. These heaters can be made as per the Customers Flange design, wattage & specifications.
Process air, Clean water, Process water Mild and corrosive solutions, Wax and molasses
These heaters are made of M.S. /S. S. pipe welded to Cast Iron / Stainless Steel threaded flange which is fitted with a replaceable refractory insulated Bobbin heating element inside.
To heat water, oil, food stuff, alkaline solutions, anodising and plating baths etc.
| Type | Sheathing | Watts | Volts | Depth Immer. |
| SSBT/10/300 | Steel Tube with 2" BSPT S.S.Flange | 1000 | 230 | 300 mm |
| SSBT/15/300 | Steel Tube with 2" BSPT S.S.Flange | 1500 | 230 | 300 mm |
| SSBT/20/450 | Steel Tube with 2" BSPT S.S.Flange | 2000 | 230 | 450 mm |
| SSBT/20/600 | Steel Tube with 2" BSPT S.S.Flange | 2000 | 230 | 600 mm |
| SSBT/30/600 | Steel Tube with 2" BSPT S.S.Flange | 3000 | 230/400Y | 600 mm |
| SSBT/30/750 | Steel Tube with 2" BSPT S.S.Flange | 3000 | 230/400Y | 750 mm |
| SSBT/30/750 | Steel Tube with 2" BSPT S.S.Flange | 3000 | 230/400Y | 750 mm |
| SSBT/30/900 | Steel Tube with 2" BSPT S.S.Flange | 4000 | 230/400Y | 900 mm |
| SSBT/30/750 | Steel Tube with 2" BSPT S.S.Flange | 5000 | 230/400Y | 900 mm |
| MSBT/10/300 | Mild Steel Tube With 2"BSPT C.I.Flang | 1000 | 230 | 300 mm |
| MSBT/15/300 | Mild Steel Tube With 2"BSPT C.I.Flang | 1500 | 230 | 300 mm |
| MSBT/20/450 | Mild Steel Tube With 2"BSPT C.I.Flang | 2000 | 230 | 450 mm |
| MSBT/30/600 | Mild Steel Tube With 2"BSPT C.I.Flang | 2000 | 230/400Y | 600 mm |
| MSBT/40/750 | Mild Steel Tube With 2"BSPT C.I.Flang | 4000 | 230/400Y | 750 mm |
| MSBT/40/900 | Mild Steel Tube With 2"BSPT C.I.Flang | 4000 | 230/400Y | 900 mm |
These heaters are made of MS/SS/Titanium or Lead bonded pipe with clamp plate which is fitted with a replaceable refractory insulated heating element inside. MS/SS/Lead bonded heaters are provided with a Terminal Cover on bracket whereas Titanium Heaters are provided with heat resistant Rubber cap & connecting wires
In water, oil, foodstuff, alkaline solution, anodising & plating bath etc. Lead bonded heaters are used in phosphoric, chromic acids heating tanks etc. Titanium heaters are used in nitric & chromic acid solutions.
| Type | Watts 230 V | Sheathing | Heating Ineffect | Heating Effect | Total Length | Fixing Clamp |
| TIT/10/450 | 1000 | Titanium | 150mm | 300mm | 450mm | 75mm x 100mm |
| TIT/20/600 | 2000 | Titanium | 150mm | 450mm | 600mm | 75mm x 100mm |
| TIT/30/750 | 3000 | Titanium | 150mm | 600mm | 750mm | 75mm x 100mm |
| TIT/40/900 | 4000 | Titanium | 150mm | 750mm | 900mm | 75mm x 100mm |
| SSBV/10/300 | 1000 | Stainless Steel | 100mm | 200mm | 300mm | 100mm x 125mm |
| SSBV/15/450 | 1500 | Stainless Steel | 150mm | 300mm | 450mm | 100mm x 125mm |
| SSBV/20/600 | 2000 | Stainless Steel | 150mm | 450mm | 600mm | 100mm x 125mm |
| SSBV/30/750 | 3000 | Stainless Steel | 150mm | 600mm | 750mm | 100mm x 125mm |
| SSBV/40/900 | 4000 | Stainless Steel | 150mm | 750mm | 900mm | 100mm x 125mm |
| LBBV/10/300 | 1000 | Lead Bonded | 100mm | 200mm | 300mm | 100mm x 125mm |
| LBBV/15/450 | 1500 | Lead Bonded | 150mm | 300mm | 450mm | 100mm x 125mm |
| LBBV/20/600 | 2000 | Lead Bonded | 150mm | 450mm | 600mm | 100mm x 125mm |
| LBBV/30/750 | 3000 | Lead Bonded | 150mm | 600mm | 750mm | 100mm x 125mm |
| LBBV/40/900 | 4000 | Lead Bonded | 150mm | 750mm | 900mm | 100mm x 125mm |
| MSBV/10/300 | 1000 | Mild Steel | 100mm | 200mm | 300mm | 100mm x 125mm |
| MSBV/15/450 | 1500 | Mild Steel | 150mm | 300mm | 450mm | 100mm x 125mm |
| MSBV/20/600 | 2000 | Mild Steel | 150mm | 450mm | 600mm | 100mm x 125mm |
| MSBV/30/750 | 3000 | Mild Steel | 150mm | 600mm | 750mm | 100mm x 125mm |
| MSBV/40/900 | 4000 | Mild Steel | 150mm | 750mm | 900mm | 100mm x 125mm |
These type of heaters are designed for use in hazardous division and zone classified areas where a potential hazard (e.g., a fire, an explosion, etc.) may exist under normal or abnormal conditions because of the presence of flammable gases or vapours, combustible dusts or ignitable fibres or flings. These are custom built heaters made in different sheathing, specifications as per customers requirements with various IP Heads for complete safety. These can be provided with screw & plug type or a Flange type installation unit.
Oil Rig, Gas Rig, Chemical Plants, petrochemical plants, Coal Mines & various hazardous locations
Over-the-Side Immersion heaters are specifically designed for heating fluids in tanks. Depending on the tank shape, size, accessibility and working area inside the tank, made in round or L shaped heater. Standard sheath materials are steel with all wetted parts made with compatible alloys. A thermowell can be provided for fitting thermostat.
Oil Rig, Gas Rig, Chemical Plants, petrochemical plants, Coal Mines & various hazardous locations
